Endurance II: 202-111
find out more
Temperature Meter 14mm Spark Plug
Endurance II: 202-119 Inverted Forks
Temperature Sensor: 48" 1200mm Temp Sensor Extension Wire
Vapor/Vector Speed Sensor: Generic Inverted Forks
Trail Tech Products | Electrical Accessories | Switch Gear
Add that last professional touch to your installation. It is a good idea to have your aftermarket lights on a different switch than your stock lights for independant control. Many options are possible.
Part Number: 040-HMS-A1A
Fits: KTM 2011-2013 250/350/450/500 XC-W/EXC/EXC-F Husaberg 2013 FE 250/350/450/501 KTM 2014 250/350 SX-F/XC-F KTM 2013-2014 450 SX-F/XC-F KTM 2008-2014 690 Enduro KTM 2009-2014 690 Duke KTM 2009 690 SMC *KTM 690 applications, the STOCK position on the switch will set the mapping to the "BAD FUEL" setting. Only use WILD and MILD settings for this vehicle.
Part Number: 040-HMS-A3A
Part Number: 040-HMS-A5C
Part Number: 040-HBS-01
Handlebar Mount On/Off Switch (toggle)
Part Number: 040-HBS-03
Handlebar Mount On/Off Switch (toggle) with spades.1. Replaces any On/Off switch with standard spade terminals.2. Replaces the factory KTM push-pull style On/Off switch. The switch has spade terminals for easy installation to the factory wire harness of any late model KTM (provided it has stock lighting capabilities.)
Part Number: 040-HBS-05
- Improved 3-Postion (Hi-Lo-Off ) plus Kill Combination Handlebar Switch - Rugged construction switch with high-tactile rubber slider. - Stainless slider shaft guaranteed not to break. - Works wet. - 22mm Wide. - Six 400mm, 18 gauge, 105ºC wires. - Switch with universal connectors available from most major distributors and dealers. - Model-Specific Versions Included in Most Trail Tech Model-Specific X2 Motorcycle Headlight Kits. No cutting or splicing required. - High-tactile rubber slider switch. - Insert molded rubber grommets keep installation looking clean. - High current contacts handle more power than other switchs (will not melt.)
Part Number: 040-LS-B
Waterproof Light Switch with Boot..4.5" leads and .25" strip lengths.Water proof light switch. This switch fits any Trail Tech light mount. Use this switch when you are running more than two lights. This switch will allow you to run lights on a separate circuit from stock lights. Switch is rated for 10 amps.Also excellent for body panel mounting in a 10mm (3/8") hole.
You have item(s) totalling
Kickstand KTM EXC/XC and Husky TE/FE/TX 2017 to 2019